Wij gebruiken cookies om uw ervaring beter te maken. Om te voldoen aan de cookie wetgeving, vragen we uw toestemming om de cookies te plaatsen. Meer informatie.
Het ATEN Control System, dat de ATEN Control Box (VK1100 of VK2100), de ATEN Configurator (VK6000) en de ATEN Control System App omvat, is een standaard op Ethernet gebaseerd beheersysteem dat alle apparaten in een ruimte of grote omgeving met elkaar verbindt voor het rechtstreeks en probleemloos aanbieden van centrale bediening via een mobiel apparaat en tablet. De VK1100 Compact Control Box werkt als hoofdcontroller die connectiviteit levert aan alle apparaten die in een ruimte zijn gevonden. Nadat de hardware is aangesloten, zorgt de VK6000 Configurator software voor een eenvoudige installatie van de apparaten met een gemakkelijke stap-voor-stap configuratie. Vervolgens verbindt de ATEN Control System-app u met de VK1100 Compact Control Box vanaf elk mobiele apparaat of tablet onder iOS, Android of Windows zodat u alle apparaten kunt bedienen, in verschillende ruimten, waar en wanneer u dat nodig vindt.
Interfaces | |
IR/Serial | • 2 x Programmable IR / Uni-directional RS-232 Port (1 x 3-Pole Terminal Block Connector); IR: – Carrier Frequency: 10KHz~455KHz; Serial: – Baud Rate: 300 to 115200 (default: 9600); – Data Bit: 8 (default) or 7; – Stop Bit: 1 (default) or 2; – Parity: None (default), Even or Odd |
Serial | • 2 x Programmable Bi-directional RS-232/422/485 Port (2 x DB9 Male Connector, configurable via pin assignments); – Baud Rate: 300 to 115200 (default: 9600); – Data Bit: 8 (default) or 7; – Stop Bit: 1 (default) or 2; – Parity: None (default), Even or Odd; – Flow Control: None (default) RTS/CTS |
Relay | • 4 x Relay Channel (2 x 4-Pole Terminal Block Connector); • Normally open, isolated Relays; • Contact Rating: Max 24 VDC, 2A |
VDC | • 1 x 12 VDC Output Port (1 x 2-Pole Terminal Block Connector); • Power Supply: 12 VDC, 1A Max |
Ethernet | • 1 x RJ-45 Female, 10/100Base-T • Supported Protocol: ICMP, TCP/IP, DHCP, HTTPS, SSH • DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds: IP: 192.168.0.60 Subnet Mask: 255.255.255.0 |
USB | 1 x USB Type A |
Switches | |
Controller ID | 1 x 16-segment Switch |
Power | 1 x On/Off Switch |
IR Learning | 1 x IR Receiver LED |
Reset Button | 1 x Semi-recessed Pushbutton |
Power Consumption | AC110V:5.4W:87BTU AC220V:5.4W:87BTU |
Power | |
Maximum Input Power Rating | Internal Power: 100-240 VAC, 50-60 Hz |
Environmental | |
Operating Temperature | 0 – 50°C |
Storage Temperature | –20 – 60°C |
Humidity | 0 - 80% RH, Non-Condensing |
Physical Properties | |
Housing | Metal |
Weight | 1.19 kg ( 2.62 lb ) |
Dimensions (L x W x H) | 21.50 x 16.23 x 4.18 cm (8.46 x 6.39 x 1.65 in.) |